What does the current AQI of 102 mean?

The AQI at CBD Belapur, Belapur - MPCB is 102, classified as 'Moderate'. People with health issues should limit prolonged exposure.

Is PM2.5 of 94.0 harmful?

PM2.5 level is 94.0 µg/m³, considered 'Poor'. Fine particulate matter can penetrate deep into lungs and cause respiratory issues. People with asthma or heart disease should take precautions.

What does PM10 level of 102.0 mean?

PM10 is 102.0 µg/m³ at CBD Belapur, Belapur - MPCB, marked as 'Moderate'. It indicates larger dust or pollen particles which may cause throat irritation or allergies.

Should I worry about NO₂ being 62.0 µg/m³?

NO₂ level is 62.0 µg/m³. Higher levels often come from vehicle emissions and may aggravate lung diseases. Consider reducing time near heavy traffic if you're sensitive.

What are the risks of CO at 40.0 mg/m³?

Carbon Monoxide is at 40.0 mg/m³. CO can reduce oxygen delivery in the body. High values are dangerous indoors and for people with cardiovascular conditions.

Why is ozone (O₃) important in air quality?

Ground-level ozone is 9.0 µg/m³. Though protective high up, it can cause respiratory problems when present in lower atmosphere, especially in sunlight-heavy hours.

When was this data last updated?

This AQI data was last updated on April 16, 2026, 2 a.m.. Check the timestamp to ensure you're viewing the most recent air quality levels.

● Live

AQI Near Agroli Village, Belapur

Serving Agroli Village, Thane (400614) · Live AQI

Last updated: April 16, 2026, 2 a.m.

Current AQI is 102 (Moderate).

Last 24 hours: low 13 · high 127

This station covers AQI for Agroli Village (400614) in Belapur.

AQI Index

102

Moderate

24h low

24h high

127

30-day avg

97.3

Good Satisfactory Moderate Poor Very Poor Severe

Check AQI at your current location
Uses device GPS · No data stored

→

Areas Covered Near This Station

Air quality readings here represent nearby areas around Agroli Village in Belapur.

Nearby locality: Agroli Village · District: Thane · Pincode: 400614

CBD Fire Station, Sakharam Patil Marg, Agroli Village, Belapur East, Navi Mumbai, Thane Subdistrict, Thane, Maharashtra, 400614, India

Pollutant Breakdown

PM2.5

94.0

Poor

PM10

102.0

Moderate

NO₂

62.0

Satisfactory

40.0

Severe

O₃

9.0

Good

SO₂

13.0

Good

AQI Trends (Last 30 Days)

Based on station history. Latest history update: 16 Apr 2026, 2 AM.

30-day avg

97.3

Top Polluted Cities (Latest)

FAQs About CBD Belapur, Belapur - MPCB Air Quality

The AQI at CBD Belapur, Belapur - MPCB is 102, classified as Moderate. Sensitive groups may experience mild health effects with long exposure.

PM2.5 at this station is 94.0, classified as Poor. Fine particles like these can enter your lungs and bloodstream, especially dangerous for people with asthma or heart issues. Avoid outdoor exercise if levels exceed 60 µg/m³.

PM10 is currently 102.0 at CBD Belapur, Belapur - MPCB, labeled Moderate. This indicates presence of coarse dust and pollen. If you're sensitive to dust or allergens, consider wearing a mask or avoiding dusty areas.

Carbon Monoxide is measured at 40.0 mg/m³ here. While safe under 1 mg/m³, higher levels can reduce oxygen delivery to organs. Vulnerable groups should avoid enclosed, polluted spaces.

O₃ level is 9.0. While ozone protects us high in the atmosphere, ground-level ozone is harmful, especially during hot afternoons. It can trigger coughing and lung discomfort.

Nitrogen Dioxide is 62.0 µg/m³ – a marker of traffic pollution. If you're in a high-traffic area or sensitive to respiratory irritants, it's wise to avoid peak rush hours outdoors.

Data was last refreshed at April 16, 2026, 2 a.m.. Some stations update hourly; others may lag. Always check timestamp before taking action.

← Back to India Overview

📊 Data Source Attribution

Air quality data provided by the World Air Quality Index (WAQI) project and the Central Pollution Control Board (CPCB), sourced via data.gov.in.