What does the current AQI of 56 mean?

The AQI at GM Office, Brajrajnagar - OSPCB is 56, classified as 'Satisfactory'. Generally acceptable, but sensitive groups should monitor exposure.

Is PM2.5 of 39.0 harmful?

PM2.5 level is 39.0 µg/m³, considered 'Satisfactory'. Fine particulate matter can penetrate deep into lungs and cause respiratory issues. People with asthma or heart disease should take precautions.

What does PM10 level of 51.0 mean?

PM10 is 51.0 µg/m³ at GM Office, Brajrajnagar - OSPCB, marked as 'Satisfactory'. It indicates larger dust or pollen particles which may cause throat irritation or allergies.

Should I worry about NO₂ being 13.0 µg/m³?

NO₂ level is 13.0 µg/m³. Higher levels often come from vehicle emissions and may aggravate lung diseases. Consider reducing time near heavy traffic if you're sensitive.

What are the risks of CO at 26.0 mg/m³?

Carbon Monoxide is at 26.0 mg/m³. CO can reduce oxygen delivery in the body. High values are dangerous indoors and for people with cardiovascular conditions.

Why is ozone (O₃) important in air quality?

Ground-level ozone is 56.0 µg/m³. Though protective high up, it can cause respiratory problems when present in lower atmosphere, especially in sunlight-heavy hours.

When was this data last updated?

This AQI data was last updated on April 16, 2026, 2 a.m.. Check the timestamp to ensure you're viewing the most recent air quality levels.

● Live

AQI Near Belpahar, Brajrajnagar

Serving Belpahar, Jharsuguda (768218) · Live AQI

Last updated: April 16, 2026, 2 a.m.

Current AQI is 56 (Satisfactory).

Last 24 hours: low 22 · high 102

This station covers AQI for Belpahar (768218) in Brajrajnagar.

AQI Index

Satisfactory

24h low

24h high

102

30-day avg

71.0

Good Satisfactory Moderate Poor Very Poor Severe

Check AQI at your current location
Uses device GPS · No data stored

→

Areas Covered Near This Station

Air quality readings here represent nearby areas around Belpahar in Brajrajnagar.

Nearby locality: Belpahar · District: Jharsuguda · Pincode: 768218

Belpahar, Jharsuguda, Odisha, 768218, India

Pollutant Breakdown

PM2.5

39.0

Satisfactory

PM10

51.0

Satisfactory

NO₂

13.0

Good

26.0

Severe

O₃

56.0

Satisfactory

SO₂

21.0

Good

AQI Trends (Last 30 Days)

Based on station history. Latest history update: 16 Apr 2026, 2 AM.

30-day avg

71.0

Top Polluted Cities (Latest)

FAQs About GM Office, Brajrajnagar - OSPCB Air Quality

The AQI at GM Office, Brajrajnagar - OSPCB is 56, classified as Satisfactory. Acceptable, but people with respiratory conditions should still be cautious.

PM2.5 at this station is 39.0, classified as Satisfactory. Fine particles like these can enter your lungs and bloodstream, especially dangerous for people with asthma or heart issues. Avoid outdoor exercise if levels exceed 60 µg/m³.

PM10 is currently 51.0 at GM Office, Brajrajnagar - OSPCB, labeled Satisfactory. This indicates presence of coarse dust and pollen. If you're sensitive to dust or allergens, consider wearing a mask or avoiding dusty areas.

Carbon Monoxide is measured at 26.0 mg/m³ here. While safe under 1 mg/m³, higher levels can reduce oxygen delivery to organs. Vulnerable groups should avoid enclosed, polluted spaces.

O₃ level is 56.0. While ozone protects us high in the atmosphere, ground-level ozone is harmful, especially during hot afternoons. It can trigger coughing and lung discomfort.

Nitrogen Dioxide is 13.0 µg/m³ – a marker of traffic pollution. If you're in a high-traffic area or sensitive to respiratory irritants, it's wise to avoid peak rush hours outdoors.

Data was last refreshed at April 16, 2026, 2 a.m.. Some stations update hourly; others may lag. Always check timestamp before taking action.

← Back to India Overview

📊 Data Source Attribution

Air quality data provided by the World Air Quality Index (WAQI) project and the Central Pollution Control Board (CPCB), sourced via data.gov.in.