What does the current AQI of 220 mean?

The AQI at Yamunapuram, Bulandshahr - UPPCB is 220, classified as 'Poor'. Health effects possible for everyone, especially vulnerable groups.

Is PM2.5 of 133.0 harmful?

PM2.5 level is 133.0 µg/m³, considered 'Very Poor'. Fine particulate matter can penetrate deep into lungs and cause respiratory issues. People with asthma or heart disease should take precautions.

What does PM10 level of 220.0 mean?

PM10 is 220.0 µg/m³ at Yamunapuram, Bulandshahr - UPPCB, marked as 'Moderate'. It indicates larger dust or pollen particles which may cause throat irritation or allergies.

Should I worry about NO₂ being 72.0 µg/m³?

NO₂ level is 72.0 µg/m³. Higher levels often come from vehicle emissions and may aggravate lung diseases. Consider reducing time near heavy traffic if you're sensitive.

What are the risks of CO at 100.0 mg/m³?

Carbon Monoxide is at 100.0 mg/m³. CO can reduce oxygen delivery in the body. High values are dangerous indoors and for people with cardiovascular conditions.

Why is ozone (O₃) important in air quality?

Ground-level ozone is 7.0 µg/m³. Though protective high up, it can cause respiratory problems when present in lower atmosphere, especially in sunlight-heavy hours.

When was this data last updated?

This AQI data was last updated on April 16, 2026, 2 a.m.. Check the timestamp to ensure you're viewing the most recent air quality levels.

● Live

Yamunapuram, Bulandshahr - UPPCB

Name: AQI near Yamunapuram, Bulandshahr - UPPCB
Address: Uttar Pradesh, 203001, IN

Station in Bulandshahr · Live AQI

Last updated: April 16, 2026, 2 a.m.

Current AQI is 220 (Poor).

Last 24 hours: low 26 · high 228

This station covers AQI for Yamunapuram, Bulandshahr - UPPCB (203001) in Bulandshahr.

AQI Index

220

Poor

24h low

24h high

228

30-day avg

121.1

Good Satisfactory Moderate Poor Very Poor Severe

Check AQI at your current location
Uses device GPS · No data stored

→

Areas Covered Near This Station

Air quality readings here represent nearby areas around Yamunapuram, Bulandshahr - UPPCB in Bulandshahr.

Nearby locality: · District: Bulandshahr · Pincode: 203001

Kala Aam, Bulandshahr, Uttar Pradesh, 203001, India

Pollutant Breakdown

PM2.5

133.0

Very Poor

PM10

220.0

Moderate

NO₂

72.0

Satisfactory

100.0

Severe

O₃

7.0

Good

SO₂

29.0

Good

AQI Trends (Last 30 Days)

Based on station history. Latest history update: 16 Apr 2026, 2 AM.

30-day avg

121.1

Top Polluted Cities (Latest)

FAQs About Yamunapuram, Bulandshahr - UPPCB Air Quality

The AQI at Yamunapuram, Bulandshahr - UPPCB is 220, classified as Poor. Air quality may cause breathing issues, especially for children and elderly.

PM2.5 at this station is 133.0, classified as Very Poor. Fine particles like these can enter your lungs and bloodstream, especially dangerous for people with asthma or heart issues. Avoid outdoor exercise if levels exceed 60 µg/m³.

PM10 is currently 220.0 at Yamunapuram, Bulandshahr - UPPCB, labeled Moderate. This indicates presence of coarse dust and pollen. If you're sensitive to dust or allergens, consider wearing a mask or avoiding dusty areas.

Carbon Monoxide is measured at 100.0 mg/m³ here. While safe under 1 mg/m³, higher levels can reduce oxygen delivery to organs. Vulnerable groups should avoid enclosed, polluted spaces.

O₃ level is 7.0. While ozone protects us high in the atmosphere, ground-level ozone is harmful, especially during hot afternoons. It can trigger coughing and lung discomfort.

Nitrogen Dioxide is 72.0 µg/m³ – a marker of traffic pollution. If you're in a high-traffic area or sensitive to respiratory irritants, it's wise to avoid peak rush hours outdoors.

Data was last refreshed at April 16, 2026, 2 a.m.. Some stations update hourly; others may lag. Always check timestamp before taking action.

← Back to India Overview

📊 Data Source Attribution

Air quality data provided by the World Air Quality Index (WAQI) project and the Central Pollution Control Board (CPCB), sourced via data.gov.in.