What does the current AQI of 103 mean?

The AQI at Industrial Area, Hajipur - BSPCB is 103, classified as 'Moderate'. People with health issues should limit prolonged exposure.

Is PM2.5 of 100.0 harmful?

PM2.5 level is 100.0 µg/m³, considered 'Poor'. Fine particulate matter can penetrate deep into lungs and cause respiratory issues. People with asthma or heart disease should take precautions.

What does PM10 level of 103.0 mean?

PM10 is 103.0 µg/m³ at Industrial Area, Hajipur - BSPCB, marked as 'Moderate'. It indicates larger dust or pollen particles which may cause throat irritation or allergies.

Should I worry about NO₂ being 10.0 µg/m³?

NO₂ level is 10.0 µg/m³. Higher levels often come from vehicle emissions and may aggravate lung diseases. Consider reducing time near heavy traffic if you're sensitive.

What are the risks of CO at 31.0 mg/m³?

Carbon Monoxide is at 31.0 mg/m³. CO can reduce oxygen delivery in the body. High values are dangerous indoors and for people with cardiovascular conditions.

Why is ozone (O₃) important in air quality?

Ground-level ozone is 25.0 µg/m³. Though protective high up, it can cause respiratory problems when present in lower atmosphere, especially in sunlight-heavy hours.

When was this data last updated?

This AQI data was last updated on April 18, 2026, 6 a.m.. Check the timestamp to ensure you're viewing the most recent air quality levels.

● Live

Industrial Area, Hajipur - BSPCB

Name: AQI near Industrial Area, Hajipur - BSPCB
Address: Bihar, 844101, IN

Station in Hajipur · Live AQI

Last updated: April 18, 2026, 6 a.m.

Current AQI is 103 (Moderate).

Last 24 hours: low 8 · high 103

This station covers AQI for Industrial Area, Hajipur - BSPCB (844101) in Hajipur.

AQI Index

103

Moderate

24h low

24h high

103

30-day avg

117.3

Good Satisfactory Moderate Poor Very Poor Severe

Check AQI at your current location
Uses device GPS · No data stored

→

Areas Covered Near This Station

Air quality readings here represent nearby areas around Industrial Area, Hajipur - BSPCB in Hajipur.

Nearby locality: · District: Vaishali · Pincode: 844101

Hajipur, Vaishali, Bihar, 844101, India

Pollutant Breakdown

PM2.5

100.0

Poor

PM10

103.0

Moderate

NO₂

10.0

Good

31.0

Severe

O₃

25.0

Good

SO₂

6.0

Good

AQI Trends (Last 30 Days)

Based on station history. Latest history update: 18 Apr 2026, 6 AM.

30-day avg

117.3

Top Polluted Cities (Latest)

FAQs About Industrial Area, Hajipur - BSPCB Air Quality

The AQI at Industrial Area, Hajipur - BSPCB is 103, classified as Moderate. Sensitive groups may experience mild health effects with long exposure.

PM2.5 at this station is 100.0, classified as Poor. Fine particles like these can enter your lungs and bloodstream, especially dangerous for people with asthma or heart issues. Avoid outdoor exercise if levels exceed 60 µg/m³.

PM10 is currently 103.0 at Industrial Area, Hajipur - BSPCB, labeled Moderate. This indicates presence of coarse dust and pollen. If you're sensitive to dust or allergens, consider wearing a mask or avoiding dusty areas.

Carbon Monoxide is measured at 31.0 mg/m³ here. While safe under 1 mg/m³, higher levels can reduce oxygen delivery to organs. Vulnerable groups should avoid enclosed, polluted spaces.

O₃ level is 25.0. While ozone protects us high in the atmosphere, ground-level ozone is harmful, especially during hot afternoons. It can trigger coughing and lung discomfort.

Nitrogen Dioxide is 10.0 µg/m³ – a marker of traffic pollution. If you're in a high-traffic area or sensitive to respiratory irritants, it's wise to avoid peak rush hours outdoors.

Data was last refreshed at April 18, 2026, 6 a.m.. Some stations update hourly; others may lag. Always check timestamp before taking action.

← Back to India Overview

📊 Data Source Attribution

Air quality data provided by the World Air Quality Index (WAQI) project and the Central Pollution Control Board (CPCB), sourced via data.gov.in.