What does the current AQI of 92 mean?

The AQI at Mahape, Navi Mumbai - MPCB is 92, classified as 'Satisfactory'. Generally acceptable, but sensitive groups should monitor exposure.

Is PM2.5 of 52.0 harmful?

PM2.5 level is 52.0 µg/m³, considered 'Satisfactory'. Fine particulate matter can penetrate deep into lungs and cause respiratory issues. People with asthma or heart disease should take precautions.

What does PM10 level of 92.0 mean?

PM10 is 92.0 µg/m³ at Mahape, Navi Mumbai - MPCB, marked as 'Satisfactory'. It indicates larger dust or pollen particles which may cause throat irritation or allergies.

Should I worry about NO₂ being 59.0 µg/m³?

NO₂ level is 59.0 µg/m³. Higher levels often come from vehicle emissions and may aggravate lung diseases. Consider reducing time near heavy traffic if you're sensitive.

Why is ozone (O₃) important in air quality?

Ground-level ozone is 9.0 µg/m³. Though protective high up, it can cause respiratory problems when present in lower atmosphere, especially in sunlight-heavy hours.

When was this data last updated?

This AQI data was last updated on April 17, 2026, 2 a.m.. Check the timestamp to ensure you're viewing the most recent air quality levels.

● Live

AQI Near Hanuman Nagar, Navi Mumbai

Serving Hanuman Nagar, Thane (400701) · Live AQI

Last updated: April 17, 2026, 2 a.m.

Current AQI is 92 (Satisfactory).

Last 24 hours: low 19 · high 108

This station covers AQI for Hanuman Nagar (400701) in Navi Mumbai.

AQI Index

Satisfactory

24h low

24h high

108

30-day avg

88.3

Good Satisfactory Moderate Poor Very Poor Severe

Check AQI at your current location
Uses device GPS · No data stored

→

Areas Covered Near This Station

Air quality readings here represent nearby areas around Hanuman Nagar in Navi Mumbai.

Nearby locality: Hanuman Nagar · District: Thane · Pincode: 400701

Thane Belapur Road, Hanuman Nagar, Ghansoli, Navi Mumbai, Thane Subdistrict, Thane, Maharashtra, 400701, India

Pollutant Breakdown

PM2.5

52.0

Satisfactory

PM10

92.0

Satisfactory

NO₂

59.0

Satisfactory

O₃

9.0

Good

SO₂

18.0

Good

AQI Trends (Last 30 Days)

Based on station history. Latest history update: 17 Apr 2026, 2 AM.

30-day avg

88.3

Nearby Stations

Kopripada-Vashi, Navi Mumbai - MPCB

Sanpada, Navi Mumbai - MPCB

Nerul, Navi Mumbai - MPCB

Tondare-Taloja, Navi Mumbai - MPCB

Sector-2E Kalamboli, Navi Mumbai - MPCB

Top Polluted Stations in Navi Mumbai

Kopripada-Vashi, Navi Mumbai - MPCB

Sector-2E Kalamboli, Navi Mumbai - MPCB

Sanpada, Navi Mumbai - MPCB

Nerul, Navi Mumbai - MPCB

Tondare-Taloja, Navi Mumbai - MPCB

Top Polluted Cities (Latest)

FAQs About Mahape, Navi Mumbai - MPCB Air Quality

The AQI at Mahape, Navi Mumbai - MPCB is 92, classified as Satisfactory. Acceptable, but people with respiratory conditions should still be cautious.

PM2.5 at this station is 52.0, classified as Satisfactory. Fine particles like these can enter your lungs and bloodstream, especially dangerous for people with asthma or heart issues. Avoid outdoor exercise if levels exceed 60 µg/m³.

PM10 is currently 92.0 at Mahape, Navi Mumbai - MPCB, labeled Satisfactory. This indicates presence of coarse dust and pollen. If you're sensitive to dust or allergens, consider wearing a mask or avoiding dusty areas.

O₃ level is 9.0. While ozone protects us high in the atmosphere, ground-level ozone is harmful, especially during hot afternoons. It can trigger coughing and lung discomfort.

Nitrogen Dioxide is 59.0 µg/m³ – a marker of traffic pollution. If you're in a high-traffic area or sensitive to respiratory irritants, it's wise to avoid peak rush hours outdoors.

Data was last refreshed at April 17, 2026, 2 a.m.. Some stations update hourly; others may lag. Always check timestamp before taking action.

← Back to India Overview

📊 Data Source Attribution

Air quality data provided by the World Air Quality Index (WAQI) project and the Central Pollution Control Board (CPCB), sourced via data.gov.in.