What does the current AQI of 135 mean?

The AQI at Sector-2 Industrial Area, Pithampur - MPPCB is 135, classified as 'Moderate'. People with health issues should limit prolonged exposure.

Is PM2.5 of 78.0 harmful?

PM2.5 level is 78.0 µg/m³, considered 'Moderate'. Fine particulate matter can penetrate deep into lungs and cause respiratory issues. People with asthma or heart disease should take precautions.

What does PM10 level of 135.0 mean?

PM10 is 135.0 µg/m³ at Sector-2 Industrial Area, Pithampur - MPPCB, marked as 'Moderate'. It indicates larger dust or pollen particles which may cause throat irritation or allergies.

Should I worry about NO₂ being 25.0 µg/m³?

NO₂ level is 25.0 µg/m³. Higher levels often come from vehicle emissions and may aggravate lung diseases. Consider reducing time near heavy traffic if you're sensitive.

What are the risks of CO at 19.0 mg/m³?

Carbon Monoxide is at 19.0 mg/m³. CO can reduce oxygen delivery in the body. High values are dangerous indoors and for people with cardiovascular conditions.

Why is ozone (O₃) important in air quality?

Ground-level ozone is 75.0 µg/m³. Though protective high up, it can cause respiratory problems when present in lower atmosphere, especially in sunlight-heavy hours.

When was this data last updated?

This AQI data was last updated on April 16, 2026, 2 a.m.. Check the timestamp to ensure you're viewing the most recent air quality levels.

● Live

AQI Near Bardari, Pithampur

Serving Bardari, Dhar (454775) · Live AQI

Last updated: April 16, 2026, 2 a.m.

Current AQI is 135 (Moderate).

Last 24 hours: low 24 · high 167

This station covers AQI for Bardari (454775) in Pithampur.

AQI Index

135

Moderate

24h low

24h high

167

30-day avg

140.5

Good Satisfactory Moderate Poor Very Poor Severe

Check AQI at your current location
Uses device GPS · No data stored

→

Areas Covered Near This Station

Air quality readings here represent nearby areas around Bardari in Pithampur.

Nearby locality: Bardari · District: Dhar · Pincode: 454775

Bardari, Pithampur, Pithampur Tahsil, Dhar, Madhya Pradesh, 454775, India

Pollutant Breakdown

PM2.5

78.0

Moderate

PM10

135.0

Moderate

NO₂

25.0

Good

19.0

Severe

O₃

75.0

Satisfactory

SO₂

32.0

Good

AQI Trends (Last 30 Days)

Based on station history. Latest history update: 16 Apr 2026, 2 AM.

30-day avg

140.5

Top Polluted Cities (Latest)

FAQs About Sector-2 Industrial Area, Pithampur - MPPCB Air Quality

The AQI at Sector-2 Industrial Area, Pithampur - MPPCB is 135, classified as Moderate. Sensitive groups may experience mild health effects with long exposure.

PM2.5 at this station is 78.0, classified as Moderate. Fine particles like these can enter your lungs and bloodstream, especially dangerous for people with asthma or heart issues. Avoid outdoor exercise if levels exceed 60 µg/m³.

PM10 is currently 135.0 at Sector-2 Industrial Area, Pithampur - MPPCB, labeled Moderate. This indicates presence of coarse dust and pollen. If you're sensitive to dust or allergens, consider wearing a mask or avoiding dusty areas.

Carbon Monoxide is measured at 19.0 mg/m³ here. While safe under 1 mg/m³, higher levels can reduce oxygen delivery to organs. Vulnerable groups should avoid enclosed, polluted spaces.

O₃ level is 75.0. While ozone protects us high in the atmosphere, ground-level ozone is harmful, especially during hot afternoons. It can trigger coughing and lung discomfort.

Nitrogen Dioxide is 25.0 µg/m³ – a marker of traffic pollution. If you're in a high-traffic area or sensitive to respiratory irritants, it's wise to avoid peak rush hours outdoors.

Data was last refreshed at April 16, 2026, 2 a.m.. Some stations update hourly; others may lag. Always check timestamp before taking action.

← Back to India Overview

📊 Data Source Attribution

Air quality data provided by the World Air Quality Index (WAQI) project and the Central Pollution Control Board (CPCB), sourced via data.gov.in.