What does the current AQI of 60 mean?

The AQI at Kasarvadavali, Thane - MPCB is 60, classified as 'Satisfactory'. Generally acceptable, but sensitive groups should monitor exposure.

Is PM2.5 of 44.0 harmful?

PM2.5 level is 44.0 µg/m³, considered 'Satisfactory'. Fine particulate matter can penetrate deep into lungs and cause respiratory issues. People with asthma or heart disease should take precautions.

What does PM10 level of 60.0 mean?

PM10 is 60.0 µg/m³ at Kasarvadavali, Thane - MPCB, marked as 'Satisfactory'. It indicates larger dust or pollen particles which may cause throat irritation or allergies.

Should I worry about NO₂ being 15.0 µg/m³?

NO₂ level is 15.0 µg/m³. Higher levels often come from vehicle emissions and may aggravate lung diseases. Consider reducing time near heavy traffic if you're sensitive.

What are the risks of CO at 15.0 mg/m³?

Carbon Monoxide is at 15.0 mg/m³. CO can reduce oxygen delivery in the body. High values are dangerous indoors and for people with cardiovascular conditions.

Why is ozone (O₃) important in air quality?

Ground-level ozone is 19.0 µg/m³. Though protective high up, it can cause respiratory problems when present in lower atmosphere, especially in sunlight-heavy hours.

When was this data last updated?

This AQI data was last updated on April 16, 2026, 2 a.m.. Check the timestamp to ensure you're viewing the most recent air quality levels.

● Live

AQI Near Anand Nagar, Thane

Serving Anand Nagar, Thane (400615) · Live AQI

Last updated: April 16, 2026, 2 a.m.

Current AQI is 60 (Satisfactory).

Last 24 hours: low 2 · high 78

This station covers AQI for Anand Nagar (400615) in Thane.

AQI Index

Satisfactory

24h low

24h high

30-day avg

63.4

Good Satisfactory Moderate Poor Very Poor Severe

Check AQI at your current location
Uses device GPS · No data stored

→

Areas Covered Near This Station

Air quality readings here represent nearby areas around Anand Nagar in Thane.

Nearby locality: Anand Nagar · District: Thane · Pincode: 400615

Anand Nagar, Thane, Thane Subdistrict, Thane, Maharashtra, 400615, India

Pollutant Breakdown

PM2.5

44.0

Satisfactory

PM10

60.0

Satisfactory

NO₂

15.0

Good

15.0

Poor

O₃

19.0

Good

SO₂

2.0

Good

AQI Trends (Last 30 Days)

Based on station history. Latest history update: 16 Apr 2026, 2 AM.

30-day avg

63.4

Nearby Stations

Upvan Fort, Thane - MPCB

Top Polluted Stations in Thane

Upvan Fort, Thane - MPCB

Top Polluted Cities (Latest)

FAQs About Kasarvadavali, Thane - MPCB Air Quality

The AQI at Kasarvadavali, Thane - MPCB is 60, classified as Satisfactory. Acceptable, but people with respiratory conditions should still be cautious.

PM2.5 at this station is 44.0, classified as Satisfactory. Fine particles like these can enter your lungs and bloodstream, especially dangerous for people with asthma or heart issues. Avoid outdoor exercise if levels exceed 60 µg/m³.

PM10 is currently 60.0 at Kasarvadavali, Thane - MPCB, labeled Satisfactory. This indicates presence of coarse dust and pollen. If you're sensitive to dust or allergens, consider wearing a mask or avoiding dusty areas.

Carbon Monoxide is measured at 15.0 mg/m³ here. While safe under 1 mg/m³, higher levels can reduce oxygen delivery to organs. Vulnerable groups should avoid enclosed, polluted spaces.

O₃ level is 19.0. While ozone protects us high in the atmosphere, ground-level ozone is harmful, especially during hot afternoons. It can trigger coughing and lung discomfort.

Nitrogen Dioxide is 15.0 µg/m³ – a marker of traffic pollution. If you're in a high-traffic area or sensitive to respiratory irritants, it's wise to avoid peak rush hours outdoors.

Data was last refreshed at April 16, 2026, 2 a.m.. Some stations update hourly; others may lag. Always check timestamp before taking action.

← Back to India Overview

📊 Data Source Attribution

Air quality data provided by the World Air Quality Index (WAQI) project and the Central Pollution Control Board (CPCB), sourced via data.gov.in.